bringing the HVAC & Refrigeration community all into one place
d
book
d
Banner CIAAR08
Alternative Energies Banner
CoolExpo 09 Banner
CIHE HVAC 09 Banner
Coolblok Banner
Home arrow Resources arrow ASHRAE Glossary
Glossary

 

The terms and definitions included in this glossary were taken from "ASHRAE Terminology of Heating, Ventilation, Air Conditioning & Refrigeration".
To access the complete glossary please visit ASHRAE's Bookstore.


You can always search for terms.

Begins with
Contains
Exactly matches

Submit Term

All | A | B | C | D | E | F | G | H | I | J | K | L | M | O | P | Q | R | S | T | U | V | W | Y | Z


I
Pages: «1 2 3 4 5 »
Term Definition
ice making water forecooler

device for cooling water before it is fed into the ice cans.

ice-melting equivalent heat absorbed by ice at 32°F (0°C) in liquefying to water at 32°F (0°C). For precise data, 143.5 Btu/lb. (334.4 kJ/kg); for definition of ton, 144 Btu/lb.

 
ice point (melting point)

1. equilibrium temperature of ice and water (usually at standard atmospheric pressure).

2. temperature at which water freezes under normal atmospheric pressure 14.696 psig, 32°F (101.325 kPa, 0°C). 

 
ice regelation

1. refreezing phenomenon; for ice, after removal of pressure induced by contacting materials, such as ice skates, wheels, wires, and bars.

2. refreezing of the water film that forms on or within ice when the pressure from applied material is sufficient to reduce the freezing point to below the ice temperature at that location.

 

 
ice storage systemthermal storage system, used for chilling processes or for comfort cooling, that uses the phase change of ice to water. Ice is formed during periods of low refrigerating demand, for delivery of cooling during periods of high refrigerating demand
 
ID


1. induced draft.

2. inside diameter.

3. internal dimension
 
ignition


initiation of combustion. Note: Combustion may be evidenced by glow, flame, detonation, or explosion. The combustion may be sustained or transient 

 
illuminance

luminous (photometric) irradiance.

 

 
impact pressure

velocity pressure plus static pressure
 
impedance

total restriction (resistance and reactance) that an electrical circuit presents to the flow of an alternating current; specifically the ratio of voltage to current and the phase angle between them.

 
impeller (rotor; wheel)

rotating part of a device (fan, blower, compressor, or pump) that moves fluid. See also fan.

 

 




1
Mistral Associates Banner Coolblok Banner Swep Banner
Sabroe Banner
Distech Controls Banner
Flexelec Banner
Cypress Envirosystems Banner
Generated in 0.55731 Seconds