|
IPUR promotes thermal rehabilitation for existing buildings energy efficiency |
|
|
|
|
Wednesday, 13 February 2008 |
|
Nowadays, the energy consumption of heating and air conditioning systems
represents approximately half of the total energy consumption in buildings. In
order to reduce the high energy intensity rates, IPUR (Spanish Rigid Polyurethane Foam Association) is focusing
on the improvement of thermal insulation, which can offer energy, economic and
CO2 emissions savings of up to 30%.
When it comes to rehabilitating a building, one has to consider several
factors. The thermal rehabilitation of covers and façades can reduce the
energy, economic and environmental impact, explains Juan Cirujeda, President
of IPUR. The drive for the rehabilitation of buildings by the Government
is a good opportunity to take effective measures, aiming at increasing real
estate energy efficiency. A renew plan that each year promotes the thermal
renovation of 2% of the existing buildings made before 1980 (about 120 000 buildings/year)
would mean the annual savings of 1 million tons of CO2.
The most efficient energy is the one that is not consumed. That is why
any action should aim at reducing the energy consumption. IPUR has outstanding
constructive solutions for the energy rehabilitation of buildings thanks to the
efficiency and resistance of polyurethane, states Juan Cirujeda. Polyurethane
foam is one of the most used insulation products in construction due to its
high insulating capacity, moisture resistance, durability in time and
environmental protection, reveals the associations press release.
|