|
CES Group develops solution for hard-to-control indoor humidity levels |
|
|
|
|
Tuesday, 08 January 2008 |
Following extensive research and
development, CES Group, which provides
innovative, cost-effective, custom-engineered solutions for todays most
challenging HVAC, has developed a nozzle-free, multiple-tube steam dispersion humidification
system. Mammoth, a CES Group company,
states that the system has proven far more effective than using single duct tube
or conventional steam pipe injection systems.
The frame-like humidification system comprises a bank of multiple,
evenly spaced tubes that provide instantaneous, evenly distributed steam. The
frame is very compact, making it possible to install directly inside either
existing duct systems or inside air handlers which makes it ideal for
retrofitting applications. The steam dispersion devices use hole-forming
technology to extract the condensate-free steam from the center of the tubes.
The design renders jacketed tubes, expensive stainless steel nozzles, and
plastic inserts unnecessary. An environment with low humidity can have a
detrimental effect on both equipment and personnel. Humidity
below 35% can cause equipment and machinery with moving parts to fail due to
high voltage static electrical charges. Low humidity can also
affect humans by causing painful static electrical discharges; and dry skin,
eyes, throat, and nasal passages. Units can be custom designed in a wide range
of sizes to address specific needs, allowing for infinitely variable tube
spacing and numbers of holes per tube. Short absorption distances are possible
because of the special design and the counter flow steam injection.
Steam absorption has always posed a number of challenges in controlling indoor
humidity levels, including determining how and where to inject moisture, cost,
time spent on maintenance, and space. According to the
companys press release, the nozzle-free CES Group humidification system
provides solutions to these challenges: it is cost effective, uses a shorter
air handling footprint for all applications, and is manufactured with welded stainless
steel to eliminate maintenance. |